View Diesel Specification   View LDO Specification   View Pricelist

  SPECIFICATION OF DIESEL

Sr.No.	Characteristics	Requirements Bharat StageII	Requirements Bharat StageIII	Test Method [p:] of IS:1448/ISO
1	Acidity,inorganic	Nil	Nil	[P:2]
2	Acidity,total,mg of KOH/g,Max	0.20	0.20	[P:2]
3	Ash,percent by mass,Max	0.01	0.01	[P:4]/ISO 6245
4	Carbon residue on 10%residue,%by mass,max	0.30	0.30	[P:8]/ISO 10370
5	Cetane number",Min	48"	51"	[P:9]/ISO 5165
6	Cetane index",Min	46"	46"	[P*]/ISO 4264
7	Pour Point,max. a)Winter b) Summer	30C 150C	30C 150C	[P:10]
8	Copper strip Corrosion for 3hrs at 1000C	Not worse then No.1	Not worse then No.2	[P:15]/ISO2160
9	Distillation,percent v/v,recovered: a)at 3500C b)at 3600C c)at 3700C	85 - 95	85 95 -	[P:18]/ISO3405
10	Flash point a) Abel 0C, min b) Pensky Martin (PMCC)0C,min	35 66	35 66	[P:20] [P:21]
11	Kinematic viscosity,cST at 400C	2.0 to 5.0	2.0 to 4.5	[P:25]/ISO3104
12	Sediment, % by mass., max.	0.05"	-	[P:30]
13	Total contamination,mg/kg	-	24	EN 12662
14	Density at 150c,Kg/m	820-860"	820-845	[P:16] or[P:32]/ISO 3675 or 12185
15	Total Sulphur,% by mass..,max	500	350	ASTM D 4294
16	Cold Filter Plugging Point,Max a)Winter Summer	60c 180c	60c 180c	[P:110]
17	Total sediments mg per 100ml,Max	1.5	1.5	ASTM D 2274
18	Oxidation stability gm/m Max	-	25	ISO 12205
19	Polycyclic Aromatic Hydrocarbon(PAH),% by mass Max	-	11	IP 391 Or EN 12916
20	Lubricity corrected wear scar diameter(wsd 1.4)at 600c	460	460	ISO 122156-1
21	Oxygen content percent by volume,Max0c	0.6	0.6	Gas Chromatography